I offer a sketch of the room sports equipment for children 5-8 years: “double” the horizontal bar or uneven parallel bars. The main advantage of the simulator is that it can be dismantled in a minute and clean under the bed.
This miniature machine probably would have liked the fabulous character of the story Leskov. With him making nails for flea horseshoes would not like the faster! However, it was a joke, but seriously, the lathe of microstock by V. Shpakovsky will be indispensable for the copyists in all cases where it is necessary to recreate the chiseled details.
Housewives know to cook the most simple salad you need, pulping vegetables, to work hard with a knife or spatula. And how much labor demand, for example, Korean dishes of carrots and potatoes, each slice must be of a certain shape. Or salting when you have to cut or chop large amount of vegetables. I myself had a long time to do it. Since then, however, as in the house there was a “Second” — very simple in manufacture and operation of slicer, the time began to spend much less, really only a few seconds. Any vegetables are crushed by machine into fractions of predetermined size and mixed together.
Soldering the printed circuit Board by soldering with a recess in the end face of sting, but such a tool is inconvenient to solder the wires and radio with a conventional outboard mounting. If the hole to be drilled not with the butt, but sting side (see picture), this versatile soldering iron can perform any Read more…
It is known that most of the screws ships — lobed, And consequently, when playing them on-models necessary to accurately mark the three holes on the propeller hub, placing their centers is strictly in increments of 120°. Of course, if you need just one screw, this is not too difficult, but a lot of…
Strong, with well-developed brush hand can easily cope with the physical work, and with a hockey stick, tennis racket, paddle.
For cooling microelectrodes rotating propeller for flying model aircraft, usually set just before small anchor impeller. It blows air through the casing of the motor. The most intensively blown by the front part of the winding and a set of anchors.
Members involved in automodelismo, sometimes have great difficulty when I need to make wheels for model kits of cars, rollers for tanks and tractors. At our station of young technicians of the Sverdlovsk district of Irkutsk city developed not too complicated production technology of any wheels with a fairly high degree of copy number.
The construction of any model is unthinkable without cutting in detail dozens of holes in the first place is quite small, with a diameter of less than 1 mm. you Buy such a drill, of course, in retail they do, but what are they clamping? Drilling machine (ordinary, not unique), a drilling machine, especially a hand drill to microwell fit a little in their size and weight is not felt the force with which to press a drill, and a fragile cutting tool often breaks down.
