Laureate of Lenin Komsomol prize of student scientific-technical society of the Moscow higher technical school named after N. E. Bauman is one of the oldest in the country. Founded in 1903 N. E. Zhukovsky, the NTO over the years of its existence gave the careers of many famous aircraft designers, scientists, inventors. Good memories most of them left their intended course of development of the NTO, areas for further research, which over time has gained followers, United in independent laboratories, student research centers. Thus, in particular, in 1949, in the scientific and technical society has a new creative division of student design Bureau, which from the very first days of its existence began to work closely with the production, scientific-research institutes. With the expansion of subjects, which was engaged by SKB, it created all new laboratory, a new student design teams.ON-ROAD AND OFF-ROAD…
Laureate of Lenin Komsomol prize of student scientific-technical society of the Moscow higher technical school named after N. E. Bauman is one of the oldest in the country. Founded in 1903 N. E. Zhukovsky, the NTO over the years of its existence gave the careers of many famous aircraft designers, scientists, inventors. Good memories most of them left their intended course of development of the NTO, areas for further research, which over time has gained followers, United in independent laboratories, student research centers. Thus, in particular, in 1949, in the scientific and technical society has a new creative division of student design Bureau, which from the very first days of its existence began to work closely with the production, scientific-research institutes. With the expansion of subjects, which was engaged by SKB, it created all new laboratory, a new student design teams.
“It’s time my childhood fell on the difficult post — war years, begins his letter to the editor M. I. Psarev. Toys we then did ourselves. Apparently, this brought me love design — all my life I’m not breaking up with tools, metal, wood and, of course, pencil and paper. Here came the second half of life, and the desire to rukovodstvu not quenched, but flares up sometimes with such force that you forget about everything”.
For many years since the entry into force of “Technical conditions” to build a home-made micro cars and sidecars the creators of these machines in their structures often used the main gear of the rocking rear axle and transmission from a wheelchair sidecars of various modifications. All the disadvantages of these mechanisms are stereotypically repeated in almost every home-made, significantly impairing their performance. Traced the pursuit of more utilitarian to fulfill this part of the design, almost nothing or nothing changing in the factory units, and parts and disguised all this slightly redesigned (compared to wheelchair) the body, fenders and other “decorations”.
Numerous experiments to create a map with the electric drive until now led to the emergence of machines, its high-speed qualities can become a training, not racing. After analyzing design flaws, we tried to create electrocat (Fig. 1). able to become a competitor to the traditional internal combustion engine.
The beauty of this glider, named “Tetra” (because of the shape of its frame), is that it is collapsible and place of training it is possible to carry in a bag or backpack. It weighs more than 20 kg. Frame glider — tetrahedron, assembled on bolts of duralumin or steel tubes. The mast compound, its elements represent segments of dural pipes with outer Ø 40 mm, stacked with pipe sections of smaller diameter. The lower part of the mast is integral with the frame Buer from the pipe Ø 50 mm.
Autonomous electric vehicle for urban master-lay is born in pain. The searches are in many countries and firms, and individual enthusiasts, yet Balk at the same impasse: power, drive. Design created by analogy with the used in production areas, being “dragged” on the streets, reminiscent of a fish out of water — they also “choke” from lack of electricity, the power required speed. Because the developers have to deal with existing types of batteries, the energy intensity which does not allow to use electric motors, similar in power to the internal combustion engines. Hence, not the same acceleration and ground speed, and the range obtained is very far from desirable.
Folding bike nowadays. However, its dimensions even when folded, not too small, and to keep it at home and even more to transport on the bus or tram is not always convenient. I set a goal to develop a convenient folding bike smallest possible folded size. I wanted it to be easily transformed into a suitcase size with the usual “diplomat”. I have to say, this was not achieved, but to construct a two-wheeled machine, which, after transformation to fit in a suitcase or bag with the size 650x450x150 mm, I still did.
This boat has always caused the attention of vodnomotornikov. Some were attracted to him emphasized the car appearance, painted on the sides of the wheels. Other interior comfort, decent speed, maneuverability and controllability. Well, hobbyists and tinkerers, in addition, was interested in the construction and manufacturing technology of the body, could not be better focused on work in the home workshop.
For successful fishing it would be nice to to good gear added luck, but still; as they say, “gotta know”. And if luck is fickle thing, then the place where the fish, I knew. But to get to them sometimes was difficult, and “equestrian”, and even Hiking. and there was only one way — by water. However, this would have at least some boats. So I decided to make a simple fishing boat.
A simple actuator that turns ordinary wheelchairs into self-propelled designed for small business “Electric” engineer A. COHOM. The device is simple enough; to make it even in the apartment, without the use of special tools and materials. As the base used, the most common and reliable wheelchair wheelchair model “400” production of Stavrovskiy plant, although you can upgrade so any.