Perhaps, in the memories of every adult baby winter fun be sure to contact the sled. And it’s safe to say that in a rare home today will not meet them: they still serve the kids and adults — the baby in daycare to take a little weight out of the house or building to deliver in the snow.OH, THE SLEIGH – RIDE THEMSELVES
Perhaps, in the memories of every adult baby winter fun be sure to contact the sled. And it’s safe to say that in a rare home today will not meet them: they still serve the kids and adults — the baby in daycare to take a little weight out of the house or building to deliver in the snow.
If you manage to build such menopausic, then you immediately become the owner of a “flotilla”! In fact: craft the proposed design for its small size called the author of “Hummingbird”, very simple conversion could be a Dinghy, a windsurfer, and a row boat. And it will be useful not only for recreation, but also serve as a great trainer for beginners.
AIRPLANE FOR TWO. Use of a low powered engine in a two-seater suggests several options of its aerodynamic layout. If not enough power, you can increase the load-bearing properties of the wing, increasing its area (and in the first place – scope). As an example, this approach can cause a plane to the ATL (the company “Robin”) and a series of French double units of the company, “Fournier”. These machines are made entirely of plastic and is fitted with lightweight motors air cooling capacity from 60 to 70 HP wing Area from 10 m2 and a span of about 10 m.
increasingly, in an editorial post meet the voluminous packages of drawings and descriptions of improvised microvesicles. Their fundamental difference from development of previous years – a successful combination in the construction standard and improvised units. The second important detail – the sharp improvement in appearance, a bold design decision. On these pages we present to the readers micromatics, which fully apply the characteristics set forth above.
The future of our country, its science and industry will soon begin to identify those who are now sitting at their desks in schools, in the classrooms of technical schools and vocational schools. What knowledge and skills they will get today, tomorrow will depend on the quality of scientific and technical developments, the level of our industry and the competitiveness of products, the development of the national economy.
Before you engage in the construction of microvesicle, I’ve been drawing various versions of its layout, trying on paper for all possible errors and miscalculations, which can only occur in the process. Looking ahead, it should be noted that designing on paper is one thing, fabrication is another. Many of the “roughness” out in the operation of the machine.
The idea of building a jeep because we like an active holiday. The basis was taken of the legendary Soviet car UAZ-69. Since it was planned to overcome the car is not only cool roads, but long distances, over “UAZ” had to work hard. At first it was disassembled “to the last bolt” and reviewed.
Bike “Tourist” lives up to its name. He’s not heavy, quite durable, easy to move, has a good ergonomic proportions, fitted with four-chain transmission; it may be two racks, generator with headlight, speedometer, rear view mirror, audible signal, reflectors and stand. The best rating is a big demand for it, which, unfortunately, is not satisfied the domestic industry.
To have a nice helmet you want to each the rider and the stages, and the requirements of the traffic police should be strictly observed. Popular hats-integrals produced by the industry, are in stores extremely rare, and the price is not small. But it turned out that to make “branded” integral and ourselves: we, a group of motor-fans, for several years, using the improvised helmets.
Somehow, “walking” on the Internet, on the website www.snowmobile.ru saw a homemade snowmobile Valery Pavlovich Smirnov, who I really liked. From the moment I came up with the idea to do something like that, in the end, and realized “in metal”. Principal longitudinal elements of the frame – spars – made of pipe sizes 28x25x2 mm, other elements – from pipe – 25x25x1,5 mm 20x20x1,5 mm.