Relax after work in the garden while resting on the hammock. Ready to buy a hammock now is not the problem, but a true master likes to do things with their hands. Especially if it does not require much effort. And to make a hammock very easy.
There was a time when to the store to buy any device, especially metal cutting machine tools was difficult. And was expensive, and a run of outlets had. Today to buy such a product just just pay. But the homebrew is still not translated, offering a new design made based on their capabilities. With the technical creativity of Feodor Nikitovich, Kuhtenko our readers are already familiar (see “M-K” N° 6 – 2012). This time we offer the more complex its design – drilling machine, constructed primarily from what the designer had on hand, though without turning and milling operations has not done.
The first thing that comes to mind after Novoselov obtain a warrant for the apartment – such as drilling holes in concrete walls, how to attach the hooks to the asbestos cladding? Meanwhile, a variety of designs, there are many traffic jams, and you will always be able to do any of them, taking into account the thickness and strength of the wall, its technical capabilities and the number of required hooks and screws. The simplest option – all known wooden plug of solid wood. Its cross section should slightly exceed the diameter of the prepared hole. Cork hammered with a hammer, then drill its center, thinner than the intended nail or screw, nasverlivaetsya hole. Unfortunately, such plugs do not always provide sufficiently reliable fastening: wood rassyhaetsya from time to time, and seemingly firmly reinforced eaves curtains or favorite printmaking fall on your head.
In cramped urban apartments to find the place bulky bench is almost impossible. Well, my folded takes up very little space. In addition, it is light enough to carry in the summer the garden area and continue to work on the air. The workbench is made of two separate parts: removable bench Board and folding table base.
Many people know or realize that any lock, even the most expensive, it is possible to open, having certain skills and tools. Design offer of the castle is simple, but will provide a maximum of “pleasure” experienced burglar before he did “bite”. People who ever interested in these issues, know the key-lock type “bolt of the sea” (perelamyvaniya bolt) — on the upper side latches or conventional valves cut teeth (grooves), into engagement with which includes the “falling” part of the key, and when you turn the last latch moved over. All is good here, but if necessary, and can be, and malice two or three attempts easy matching desired length of the free end of the key…
Numerous devices to footwear designed to protect from a fall on a slippery road, have, as a rule, one common drawback: effective on the ice, they begin to help its owner to slip, if he sets foot on the stone floor or metal step. To avoid this, means snow needs at the right time to display to the off position. As described below, the device allows to do this.
