Rotted benches in the dressing room… they were Made according to the ancient traditions of larch boards, comfortable, firmly put together and seemingly eternal. But the legs on the bottom and top and seat stitching has rotted. Besides, it turned out that their was a massive screen for the heat from the stove. In the end, the paneling behind the stands, do not dry, plesnila and spoil it. To address these shortcomings, I decided to make a new shop with metal legs and durable, and will not rot. The design will be “transparent” to heat flow from the stove to the walls behind the stands. Still, the metal has a property easy to heat up, accumulating heat, which will allow you to quickly dry the intersection of the legs with the seats and floors.
THE BENCH IN THE DRESSING ROOM
Reading the tips in the magazine, I decided to share my way of deepening pipes for water column-the pump and install the bars of the fence on a country or garden site. With the help of a simple device consisting of two coupling halves and drummer, playing the role of the pile of “baby”, it is possible to bury the pipe with a diameter of 50 mm to a depth of 8 m. All work will be easily fulfilled by one person.
As you know, model airplanes and much hard work the most boring work is making ribs. Most often they are cut from plywood or veneer with a fret-saw or sharp knife, and then push the workpiece through the skins. Meanwhile, this is not too interesting and hard work it is possible to rationalize. Just need to make some simple devices that will dramatically reduce time costs.
In a country house, summer cottage, which are usually only in the warm season, soft furnishings not tolerate the cold winter time. Spring core it rusts and begins to creak, the foam quickly breaks down, and the pen requires prolonged drying, in the spring, of course, difficult. So it is much better to make such premises a “peasant”, dominated by simple wooden plane. And for softness to use the overhead mattresses and pillows, which would be wintered in a warm apartment. In addition, the wooden parts are easy to decorate with carved or patterned paintings that give the room a special flavor, different from the city.
The first thing that comes to mind after Novoselov obtain a warrant for the apartment – such as drilling holes in concrete walls, how to attach the hooks to the asbestos cladding? Meanwhile, a variety of designs, there are many traffic jams, and you will always be able to do any of them, taking into account the thickness and strength of the wall, its technical capabilities and the number of required hooks and screws. The simplest option – all known wooden plug of solid wood. Its cross section should slightly exceed the diameter of the prepared hole. Cork hammered with a hammer, then drill its center, thinner than the intended nail or screw, nasverlivaetsya hole. Unfortunately, such plugs do not always provide sufficiently reliable fastening: wood rassyhaetsya from time to time, and seemingly firmly reinforced eaves curtains or favorite printmaking fall on your head.
