All the details of this wooden truck, so the tools for the job need simple: kicks jigsaw, drill, sandpaper, files. The frame consists of two strips of a cross section of 25X36 mm and a length of 640 mm. Transverse elements: a round wooden rod with a diameter of 25 mm (front), plywood plate 75X160 mm thick of 6 mm (bottom cab) and box rear axle, assembled with glue n small studs made of plywood with a thickness of 5-6 mm. At the rear of the frame in the middle of the drilled hole 12 mm in diameter — one for the axis of the body, and the other for the main winch of the lift.AND A JIGSAW AND A DRILL
All the details of this wooden truck, so the tools for the job need simple: kicks jigsaw, drill, sandpaper, files. The frame consists of two strips of a cross section of 25X36 mm and a length of 640 mm. Transverse elements: a round wooden rod with a diameter of 25 mm (front), plywood plate 75X160 mm thick of 6 mm (bottom cab) and box rear axle, assembled with glue n small studs made of plywood with a thickness of 5-6 mm. At the rear of the frame in the middle of the drilled hole 12 mm in diameter — one for the axis of the body, and the other for the main winch of the lift.

Not going to tell you about what is a fascinating (though difficult) kind of leisure — Hiking. However, after a long and sometimes multi-day transition fatigue accumulates in the muscle and sweat and dirt on the body. In the heat you can bathe and relax in the river, lake or stream. In the same cool weather without a bath is not enough.



Unfortunately, experience manufacturing propellers for the Amateur designs with rare exceptions not worth repeating. And perhaps the main cause of failures in the inconsistency of the parameters of the propeller with the engine performance. Often Amateur designers create too “heavy” in the wind against the propellers, causing the engine not developing full power and thrust is insufficient.

The proposed design is a four-section, three-man boat with load capacity of 320 kg In tourist trips she, being dragged to the Bank, turns in a fairly spacious “tent”, especially if you throw on top of a piece of plastic film. The boat is so simple that it can make even a person unfamiliar with shipbuilding and have only basic skills working with wood. To manufacture do not need special equipment and space, the whole boat is going in the room of a city apartment. It is made from widely available materials that can be Purchased in stores construction And household goods. The cost is Approximately 20-30 rubles (in passing it should be noted that for the registration of boats is necessary to keep all checks and receipts).
Kordovye aircraft models — the most popular among modelers. First among them is “air fighters”. And it is clear. The airfield may be a stadium, any forest or meadow flat area with a diameter of 40-50 m. One of the main requirements for such models, the simplicity of manufacture. Indeed, during the “air battle” inevitable collision and, consequently, breakdowns.
Siberian airfields early 70-ies of the last century — the time of intensive development of the Tyumen oil fields — is hard to imagine without helicopters, created in OKB M. L. Mil. In the summer the airfield is a small airport in Surgut worked several hundred helicopters. In addition to local squadron here flew helicopters from all over the Soviet Union. Mi-2, Mi-4, Mi-6 and Mi-8 was raised to the sky during the long daylight hours. Mi-2 and Mi-4 was delivered to the place of work of geologists, drillers, and numerous teams of builders, heavy Mi-6 was carrying bricks, boards, barrels of fuel, pipe, power transmission towers, drilling equipment, mobile homes. Such intense and dedicated work is clearly confirmed, as required in terms of the local offroad helicopter.
As you know, four-wheel drive Jeep Wrangler are derived from army vehicles to Willis MB and Ford GP. They inherited from prototypes, high reliability, Spartan simplicity and ruggedness. The years went by, cars were improved; increased engine output, increased reliability and security, a Jeep Wrangler has remained the same — short wheelbase, two-door, with an open body and simple internal design.