There are cases of disconnection of water in homes for a long time not only for repair of water system, but also for its economy. Such breaks is fraught with the danger of flooding the entire apartment and the neighbors left unclosed tap, what’s going on not only in a hurry or distraction, but because of the lack of water in the pipes and hence the impression that the valve is closed. It is easy to imagine the consequences of a sudden resumption of water supply in the absence of the owners of the apartment.
VALVE FROM THE FLOOD
Self-propelled chassis, called the “Bull” that I built over ten years ago. For such a considerable time of operation the machine showed itself unpretentious, reliable and workable. The layout of its classic truck body front, the driver’s seat (in this case it is open) and the engine — rear; front axle — steering, rear — host. “Bull” is primarily designed for the carriage of goods weighing up to 500 kg with a speed of 35 km/h. But it is possible to work the ground. We only need, say, before plowing to replace the sprocket gearbox for a large, which will give increased traction, and attach the plow. Also, using a PTO shaft to hook up and operate a circular saw, water pump, mower, etc.
brickos — valuable fruit crop originated from Central Asia. However, not all varieties are suitable for drying because of the low content of the substance, the main component of which is sugar. It is usually early ripening varieties. To obtain high quality dried fruits it is advisable to use fruits with sugar content not lower than 19-20 percent.
Offer to readers design their new walk-behind. But before describing it, a little background. Village life is hard their daily monotonous work in summer and winter, rain and snow… Wanted to do something to alleviate all this work and care. I did a walk-behind tractor. And not generic, as usual, with a cart, because more needed in the vehicle. For the relative small size called it a “Humpbacked”.
A sequence of various technological operations, DMG CTX gamma 2000 TC — a technology that allows to provide a complete and advanced processing technique. Thanks to the power rotation, gear hobbing tooling, drilling, punching machining is performed up to 5 axis interpolation. The video shows many of the operations that are used in the energy sector.
