Processing small plots of land, traditional small-sized motorcycles, in our opinion, is quite difficult. Therefore, we have selected other flowsheet which consists of the following: the power plant is at one end of the plot, and the working body from the opposite edge of the plot moves toward the power unit. The operation can have two options: one course of work, and the reverse is blank; in the presence of blocks — both stroke work.FIXED MOTOBLOK
Processing small plots of land, traditional small-sized motorcycles, in our opinion, is quite difficult. Therefore, we have selected other flowsheet which consists of the following: the power plant is at one end of the plot, and the working body from the opposite edge of the plot moves toward the power unit. The operation can have two options: one course of work, and the reverse is blank; in the presence of blocks — both stroke work.
Offer for fans of DIY table homemade drill press using hand drill. On a solid base is mounted a hollow stand-tube, movably installed inside the stock. On the one hand, he sliced the rack to drive the vertical feed, and with another selected area for connection of the bracket with the guide bar through the longitudinal groove of the rack. On the bracket mounted hand drill and the motor. The drive from the drill motor is belt drive. Vertical supply node provides a mechanism assembled in a separate housing. The external dimensions of the machine depend on the chosen length of the strut and the base; the vertical stroke serves for the size — 100 mm.
Somehow I came across the article “Vitamin Jack” (“M-K” № 7, 1985), where the author writes that in the procurement of juices crushes apples with a wooden mallet in a small barrel. I found unconvincing his argument in favor of this technology — especially manual.
The creation of various devices to facilitate work in the garden I have been doing for many years. However, to the readers of their developments have not yet ruled, this is my first attempt.
I made it for the treatment of plants with pest garden. Gathered from local funds, mostly from the motor from the sewing machine, and gear-type oil pump of the motorcycle “Ural”. Installed them on a common base and joined the long drive shaft. The convenient sprayer that attaches to the wall of any suitable container (bucket, tank, pot) with a clamp and a bolt with a nut.
“Acquired motor brand Bouzid, going to use it on microstructure. But faced with the difficulties of linking the power transmission from the engine to the wheels, and the reversal of the movement, Maybe someone already solved this problem?”
It’s nice to try fresh mushrooms in the depths of January. You can collect them at any time of the year, if you build champignones. Externally there is a double wardrobe with size 2130 X 2290 X 1035 mm, which can be set, for example, in a large hallway.
Electrofresh intended to work the land and garden plots, hilling potatoes. Especially given the tough operating conditions — long continuous work (up to 4 hours), the constant overload, dirt, preference was given to more heavy and oversized three-phase motor, totally enclosed, front manifold, DC.
The “greenhouse effect” can work for good — with a lack of heat in the spring or cold summer days, and evil — when the bright summer sun brings the temperature in the greenhouse to levels that even heat-loving tomatoes and cucumbers do not stand up and die. This does not happen, when at any moment you can lift the transom and reduce thereby the temperature in the greenhouse. Well, what about those owners of the garden plots, which come to the country at best once a week?