An increasing number of people would be able to apply Wallpaper in your apartment or room, saving the money and not be restricted by the presence of outsiders -masters. Indeed, it is not hard work, it can be done yourself, but it requires patience, accuracy and some preparation. The lack of expertise here kompensiruet high accuracy and sensitivity.
The development of the garden or suburban area, many owners have to start with providing it with water. Since this problem started and I. The water in the area lies relatively close to the surface – at a depth of about 4.5 m. it would be Possible to dig a dug well. But water consumption was expected irregular and uneven and stagnant water – not the best, not only for drinking or cooking, but also for irrigation.
In small apartments, each square meter not only, as they say, accounting, but is used by the hosts with the maximum load. And that, in General, reasonable. For such housing they try to buy foldable furniture. But at a time when it is not in use, it is in a compact folded standing idle, waiting in the wings (e.g., table-book, clamshell, etc.). In such circumstances, the most appropriate are generic (multi-functional) furniture. They serve their owners, that is, in full — and day and night. A good example of this might be the sofa bed.
In the manufacture or repair of products in the home often have to glue the parts (and more parts) of various materials relevant brands of glue, good in selling their great variety — from generic to special. But an indispensable condition for the quality of the joining parts, even superglue are the need to fasten tightly pressed surfaces, and aging them under pressure to complete drying or polymerization of the binder is from several minutes to days, depending on the brand of glue and applied technology.
Our journal has several articles dedicated to the subject of the application with the use of such waste material, as various bottles. We return to this theme, offering our readers the article author of the suburban town of Vidnoye B. V. Akimov, on the advice which can be disposed of in the country the construction of much of the discarded waste of household. What would I had to either build a house or dacha in six acres primarily designed, as would the shortage of land to combine several functions with minimal cost.
We are accustomed to the fact that the furniture in the house or in the country are made usually from wood or materials on its basis, such as plywood. Wood, according to tradition, are usually made and garden furniture: benches, chairs, tables, and most of all — your hands as this material is available and easily processed. But along with many indisputable advantages of wood it has a significant drawback — it is hygroscopic, that is, not only absorbs falling on her water, but even absorbs moisture directly from the air, thus defiled, darkens, swells, rots, and subsequent uneven drying—warp, crack.
Capacity pipes through their joints is a matter that must face not only the professionals who build and service pipelines. Many homebrew, rural residents, gardeners-gardeners are forced to do such work: one for some designs, others — for various buildings, and some for water.
At the present time become unneeded enlargers: not only because of the high cost and scarcity of photographic materials, but also wide distribution of “phocomelic” and laboratories for developing and printing. Offer a simple method of altering the enlarger in… drilling machine, which is a must for home handyman. For this purpose, suitable enlargers as the friction load of the projector and the suspension of the oscillating rods. Both of these options provide a smooth, effortless moving the projector up and down. Instead, using a clamp to be secured a drill.
In the manufacture of handmade furniture is particularly advantageous to find a solution component structures, which visually unifies the disparate objects in a single set. It is often limited to superficially similar features: for example, the same handles from cabinets, shelves and tables or just a single color surface finish of parts.
A good soldering iron stand is necessary for the radio Amateurs and all those who deal with soldering. Description of just such a fixture and is offered to attention of readers. The stand can be made at home from readily available materials, with minimal plumbing skills and ordinary tools. It is simple in design and easy to operate. The stand has a special slot for bottles with three types of liquid flux and one with alcohol. In addition, two resealable containers: great for solid rosin and solder, a small – coiled spiral wire of solder (one or two of the Central loop are pulled up straight, and placed vertically so it looks like the column of solder that is easy to take in small amounts at the tip of the iron when soldering printed circuit boards). On the edge of the stand, the wooden deck is the place of tinning wires and insights details.
